Disclosure: This post contains affiliate links. If you purchase through these links, I may earn a small commission at no extra cost to you.
ALORAIR Hanging 270° Intake Air Filtration System — PureCare 1080 (Ceiling Mounted Dust Collector)
Keep your workshop air clean and your lungs happy with the ALORAIR PureCare 1080 — a powerful hanging air filtration system designed for woodworking shops, garages, and hobby workspaces. With a wide 270° intake, two-stage airflow (780 / 1080 CFM), MERV 11 filtration and a quiet operation under 60 dBA, this system helps remove fine sawdust and airborne particles so you can focus on your craft.
Key Features
- 270° Air Intake Coverage — pulls dust from a wide area, ideal for medium to large workshops (covers up to ~1,100 sq.ft.).
- Two-Stage Airflow — selectable 780 CFM or 1080 CFM to match workload and balance noise vs. performance.
- MERV 11 High-Efficiency Filter — captures ~90% of 3–10 μm particles and ~85% of 1 μm particles (replaceable).
- Strong Vortex Fan — maintains high static pressure even when filters load with chips or dust.
- Remote + Timer — IR remote control (low interference) and timer cycle (1–9 hours) for hands-free operation.
- Quiet & Compact — under 60 dBA noise rating, dimensions 19.4" L × 19.4" W × 9.6" H, easy to ceiling-mount with included hook & chain.
Specifications
| Model | PureCare 1080 |
| Airflow | 780 CFM / 1080 CFM (2-stage) |
| Coverage | Up to ~1,100 sq.ft. |
| Filter | MERV 11 replaceable filter (captures 1–10 μm particles efficiently) |
| Noise Level | Below 60 dBA |
| Power | 115 V, 60 Hz, 1.5 A |
| Dimensions | 19.4" L × 19.4" W × 9.6" H |
Pros & Cons
- Wide 270° intake efficiently captures dust across a large area
- Powerful vortex fan holds static pressure when filter loads
- Remote and timer for convenient hands-free use
- Low noise for comfortable workshop environment
- Filter replacements are an ongoing cost (replace as needed)
- Not compliant with some California regulations — cannot be shipped to California
- No dedicated mounting base included (hooks/chains provided)
Who This Is For
The ALORAIR PureCare 1080 is aimed at hobbyists, serious woodworkers, small-scale shops, and makerspaces that need reliable airborne dust capture. It’s particularly useful for:
- Sanding, turning, and finishing work where fine dust is generated
- Scroll saws, routers, and rotary tool work that produce airborne particles
- Workshops that want continuous air circulation and quieter filtration
- Garages and small commercial shops up to ~1,100 sq.ft.
Installation & Maintenance Tips
- Mounting: Hang from ceiling joists using the included hook & chain for best coverage. Ensure secure fastenings to support the unit’s weight.
- Filter Care: Check the MERV 11 filter regularly. Replace when visibly loaded or when airflow drops noticeably—this keeps performance high.
- Timer Use: Run the unit for 10–30 minutes after finishing dusty operations to clear suspended particles.
- Remote: Keep the IR remote in a visible line of sight to avoid interference and ensure reliable operation.
Important: This product does not meet California's regulatory requirements and cannot be shipped to California. Please do not order if you are located in California.
Final Thoughts
For workshops where airborne dust is a constant problem, the ALORAIR PureCare 1080 offers a compelling blend of airflow power, filtration efficiency, and convenient controls. It’s a practical step toward a cleaner, healthier workspace — just be sure to check shipping restrictions for your state before ordering.
*Specifications and features sourced from the product listing. Always confirm compatibility with your workshop setup before purchase.